Replacement Handles For UPVC Windows

UPVC window handles come in a variety of styles, but all of them operate the same locking mechanism. To replace a uPVC window handle, remove the top screw located at the base of the handle. This will reveal two additional screws.

Then, take a measurement of the length of the spindle to make sure the new handle is a good replacement. It's important to know what kind of handle you've got because there are a variety of sizes.

Inline Espagnolette Handles

Most double glazing window replacement-glazed windows have Espagnolette handles that operate multi-point locks for improved security. The handle is operated by a 7mm square spindle that connects to a gearbox inside the window frame. This gearbox moves the multi-lock mushroom when the handle is turned. They come in a variety of styles comprising cranked, inline key locking and cockspur handles and they are also available as an entire set to replace one handle that is broken or worn out.

The uPVC handle replacement kits that we offer are designed to make replacing a damaged or defective espagnolette window handle easy. These uPVC handles come with all the necessary fixing screws and a range of spindle sizes to suit all applications. These handles also come with key-plugs that permit them to be switched from traditional open/closed handles fire escape or egress locking handles (if they are fitted with the appropriate key plug).

If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Another alternative is our Yale Sparta 2 Inline Espag Handle that was designed for minimal aesthetic intrusion by having a lower base. It is part of our suited range of hardware and is available in a variety of finishes all of which comply with the requirements of BS EN 1670:2007 Grade 5 corrosion resistance. They have been tested for durability and are suitable for use in acidic woods and coastal environments. They also work with cylinder immobiliser inserts that allow you to achieve key-locking status where this is required.

Cockspur Handles

Cockspur handles, often found on older uPVC or aluminium windows and doors They are a simple latch-and-catch arrangement. The handle nose is attached to or inserted into the catch which is a wedge block made of plastic, which is attached to the frame of the window. As the wedges are available in different sizes, it is essential that you know what step height to purchase before buying the new handle. As a rule Upvc windows typically have a step size of 21mm and aluminum frames typically come with a handle step of 9mm.

The cockspur handle can be locked by using a key, bringing security to your home. The lock is put into the handle using spindles, which fit into the handle through the hole for locking (also called a backset). The spindle measures 7mm square and can be used either to open or close the window.

If you are replacing a handle for a cockspur, it is important to ensure that the replacement has the same step height as the original. It is usually measured from the bottom of the spur on the handle to the underside of the handle's nose. This measurement is often referred to as the stack height or backset. It is crucial to know this information prior to placing an order for any handle.

Cockspur handles are available in straight/universal or cranked. They are available in left hand or right handed versions. This is to allow the handles to be fitted onto windows that open to the left or right and to allow the user a better access to the window.

It is crucial to determine whether or not your window needs a restrictor that is designed to stop the handle being extended beyond a certain amount. Generally, they are required for high-rise commercial or flats for security reasons. However, the majority of domestic homes don't require them.

There are many different styles and colors for a cockspur handle, including stainless steel with brushed finishes and white uPVC options. The ideal cockspur handle for your windows depends on your taste and Replacement Handles For UPVC Windows style and the way you want the window to work.

Handles that can tilt and turn

Tilt and turn handles are a popular kind of handle which is typically seen on double glazed replacement windows-glazed windows throughout the UK. Both upvc windows and timber ones have them. The handle is generally positioned at 90 degrees, however it can also be turned to 180 degrees. This permits the window to be opened to the room fully and also to drop down to let air circulate. The handle is locked in this position and requires the use of a key to unlock it when needed.

This kind of handle is easily replaced, as it only has one big handle, not a number of smaller ones. This reduces the appearance of the handle and is more in line with modern minimalistic design trends. In addition to this they are much simpler to clean than casement windows because the window opens up to the inside and can be cleaned on both sides.

Another benefit of tilt and turn windows is that they are between 4 and 8 times stronger than casement windows. This makes them ideal for larger windows as well as doors. The frames are also constructed from steel core that adds strength and durability.

The tilt and turn mechanism is also safer than the casement window, because the handle can be locked at any angle. This is especially crucial in areas where children could live, as it can stop them from accidentally opening the window.

Many homes opt for tilt and turn windows because they can be used in various ways. They can be opened horizontally as windows, lowered down in a hopper fashion to allow for ventilation, or tilted inwards for cleaning and maintenance. This is a great choice for those looking to increase airflow and reduce the sound in their home. The glass is easily removable, making them easy to clean and maintain. You can find these windows in a variety of sizes and colors. These windows are suitable for any type of home and are a perfect match for both modern and traditional styles.

Crank Handles

Crank handles require only a little effort to open and allow for a spectacular view of the outdoors without blocking the glass. They are commonly used in casement windows which are hinged on the sides or awning windows. They have a mechanism similar to windows, with a linkage arm that supports the window sash, which can be opened or closed by cranking the handle in the clockwise direction. Contrary to other kinds of handles, a crank window's mechanism and handle are subject to a significant amount of wear and tear that can cause the gears strip and the handle to cease working or fall off of the operator shaft. By inspecting the crank handle and operator Replacement Handles For UPVC Windows mechanism regularly will ensure that they remain in good condition for many years to be.

A crank handle is made up of a mechanical shaft which rotates perpendicularly and is attached to an arm. The arm is rotated in a circular motion by grabbing it and turning it, much like you operate a sharpener. In certain situations, the handle can be operated by the leg.

The base of the crank handle is hollow. This hole allows it to be connected to machinery and equipment. The handle's arm has a connecting bar that converts the circular motion from the handle into reciprocating and rotary motions that allow you to operate machines and equipment.

Boats are often transported on trailers using crank handles, as well as the adjusting equipment and machinery. They are typically made from stainless steel that is resistant to corrosion in marine environments. The majority of boat crank handles have been powder coated to protect against damage and make them easier for cleaning.

If the crank handle on your window has stopped working or won't open the window, it might be time to replace it. Find the trim mounting screws in the window frame's track. If there aren't any, you can try to loosen the cover using a strong putty knife by sliding it between the window jamb and the frame and pulling it. If that doesn't work, you can take off the cover and open the crank mechanism by uncreasing the screws in the window frame.